Use five supplied section drawings to compare frame dimensions, glazing and component thicknesses, while keeping construction details separate from assembly performance.
Five configurations with supplied original drawingsSwipe the table to view drawings
ConfigurationFrame sectionGlazing as drawnOriginal drawing
Class A · Double glazing50 × 115 mm25 mm composite glass + 6 mm tempered glassDownload PDF
Class A · Side glazing50 × 106 mm25 mm composite glassDownload PDF
Class C · Single glazing50 × 82 mm12 mm tempered glassDownload PDF
Class C · Double glazing50 × 98 mm6 mm + 6 mm tempered glassDownload PDF
Class C · Side glazing50 × 106 mm12 mm tempered glassDownload PDF

Dimensions are transcribed from the supplied section drawings and apply only to the illustrated configurations. They do not state the fire performance of a complete partition.

Match the drawing to the product

Check the Class A or Class C designation, single or double glazing, and whether the glass sits centrally or to one side of the frame. Dimensions and thicknesses apply to the configuration shown in that drawing. Check similarly named products individually.

Separate section dimensions from material thickness

Frame section dimensions, core thickness, pressure plate thickness and glass thickness describe different features. Follow dimension lines and callouts to the relevant components, then compare them with site openings, panel layouts and edge details. A section drawing does not define the overall wall dimensions.

Review drawings and performance documents separately

A section drawing explains component positions and assembly details. For performance verification, review test documentation that covers the supplied configuration, including the glazing, profiles, sealing materials and installation conditions. A drawing does not replace a test report.